High Rigid PA66 Nylon Round Shape V0 Flame Retarded Impact
PA6 and PA66 are similar, however, its low melting point, and the
process temperature range is very wide. Its impact resistance and
solvent resistance are better than PA66, but also more moisture.
Many properties of plastic parts are affected by moisture
absorption, and therefore the use of PA6 design products to take
full account of this. In order to improve the mechanical properties
of PA6, often adding various modifiers.
Color Customized Nylon PA66 V0 Flame Retarded for Engineering
Plastics can be added glass fiber from 15%-40% as you need and
black or any other color will be receive as your order .We will use
long fiber to reinforce nylon6.Its finished products can work at
high temperature and have excellent surface ,low shrinkage rate,
good dynamic balance and low friction.
Wear resistant nylon PA66 35% GF for engineering plastics can be
processed by injection molding,blow molding and extrusion molding
.Its ending products will be used in racing car,aviation and
High Heat Resistance,high impact resistance
free sample,5-15kg sample will be sent as your need
high mechanical strength and impact resistance
Our company specializes in modified engineering plastics.We are not
only able to provide our customers best pre-sales and also provide
after-sales.welcome to our company and look forward to cooperate
|Product name||Fiberglass mesh||Color||White or other color|
|Material||Pt C- glass fiber||Emulsions||Acrylic emulsion|
|Use||1> Wall reinforcing material; 2> Reinforced cement products;
3> Granite, mosaic dedicated mesh, marble backing mesh; 4>
Waterproofing membrane cloth, asphalt roofing; 5> Reinforced
plastics, rubber reinforcing materials; 6> Firewood; 7> Wheel
fabric; 8> Highway pavement with geogrid; 9> Building
caulking tape and other aspects.|
|Main Performance||Good alkali resistance; The best ingredients; Good stability;
Construction and high efficiency.|
|Packing||PVC packaging, then 4 ~ 6 rolls into carton, or 16 ~ 36 rolls into
the tray; last into the containers|
|Special Note||If you have special packaging and special specifications, we can
produce for you.|
|identification||Density tex||Moisture content(%)||Combustible content(%)||stiffness(mm)||Net weight(kg)|
|ER13-2400||2400||≤ 0.15||1.15± 0.1||130± 20||18± 0.5|
|ER13-3100||3100||≤ 0.15||1.15± 0.15||130± 20||18± 0.5|
|ER13-4800||4800||≤ 0.15||1.15± 0.15||130± 20||18± 0.5|
We have four kinds of Fiberglass Direct Roving and eight kinds of
Fiberglass Assembled Roving
Four kinds of Fiberglass Direct Roving
1) E-glass Direct Roving for Filament Winding
2) E-glass Direct Roving for Pultrusion
3) E-glass Direct Roving for Weaving
4) E-glass Direct Roving for LFT
Eight kinds of Assembled Rovings
1) E-glass Assembled Roving for Spray-up
2) E-glass Assembled Roving for Eilament Winding
3) E-glass Assembled Roving for SMC
4) E-glass Assembled Roving for Chopping
5) E-glass Assembled Roving for Centrifugal Casting
6) E-glass Assembled Roving for Panel producing
7) E-glass Assembled Roving for Thermoplastics
8) E-glass Assembled Roving for GMT
Please tell us the following content when you send your inquiry to
I) What's the production process of the roving you will do?
II) What's the end use of the rovings and what's the final products
made from the rovings?
III) What's the resins will be used together with the rovings?
IV) Who supply you the same fiberglass before? The brand name and
the items number?
How many tex of rovings you need (like 600tex, 1200tex, 2400tex,
1. How long will you get reply?
All the inquiries will be replied within 24 hours.
2. Can you provide sample?
Yes, you’re welcome to come to our company, then we’ll offer free
sample for you.
3. What is the production lead time?
Usually 15 days.
4. Do you provide customized service?
5. What’s your MOQ?
6. How you transport the products?